KSQ Technologies (Beijing) Co. Ltd
KSQ Technologies (Beijing) Co. Ltd At KSQ We always look at the business in your point of view.
Add to Cart
Down Hole Hammers Golden For Hard Rock Mining 4 Inch DTH Hammers Drilling
Describtion
In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH hammers a nearly constant penetration rate regardless of hole length.
| Product name | DTH Hammer |
| Material | Alloy Steel&Tungsten Carbide |
| Use | Underground Mining,Water well,Mining,Quarry etc. |
| Color | Green&Others |
| Heat treatment | Anneal |
| Shank series | DHD,COP,MISSION, SD, DHD, BR, QL, BR,CIR etc. |
| Application | heavy construction,Ore Drilling, mining, oil and gas, quarries |
| Hole | 60-305mm |
| Size | 2/3/4/5/6/7/8/9/10/12/14 inches |
| Advantage | High Performance and factory price |
• Small to medium size drilling diameters
• Works in low pressure range, capable of drilling shallow to medium hole lengths
Specification
| DTH hammer type | DHD35 | DHD45 | SD4 | QL4 | |
| Length(less bit) mm | 930mm | 1030 | 1084 | 1097 | |
| Weight(less bit) kg | 25kg | 39 | 40.5 | 41 | |
| External diameter mm | Φ82mm | Φ99 | Φ99 | Φ99 | |
| Bit shank | DHD3.5 | COP44 DHD340 | SD4 | QL40 | |
| Hole range(mm) | Φ90-110 | Φ110-135 | Φ110-135 | Φ110-135 | |
| Connection thread | API 2 3/8” Reg. | API 2 3/8"Reg | API 2 3/8"Reg | API 2 3/8"Reg | |
| Working pressure | 1.0-1.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | |
| Impact rate at 1.5-1.7Mpa | 28Hz | 27Hz | 27Hz | 27Hz | |
| Recommended Rotation speed | 25-40r/min | 25-40r/min | 25-40r/min | 25-40r/min | |
| Air consumption | 1.0Mpa | 4.5m3/min | 6.0m3/min | 6.0m3/min | 6.0m3/min |
| 1.8Mpa | 9.0m3/min | 10.0m3/min | 10.0m3/min | 10.0m3/min | |
| 2.4Mpa | 15.0m3/min | 15.0m3/min | 15.0m3/min | ||
Advantages
| dth hammer: | dth hammer spare parts |
| More efficient energy transfer. | Valveless air distribution. More reliable. |
| Faster drilling speed, 15%-30% higher than others. | Simple design of the piston, long life |
| Lower air consumption and lower oil consumption. oil consumption is about 10% lower than others | Fewer internal parts, simple structure, longer life, less failure and easier to maintain because all the parts are heat treated. |
| Direct factory price | Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-step thread. |
Applications
• Underground mining
• Quarry benching operations
• Water well drilling
